(
DTD173
Cordless Impact Driver
DTD173
Cordless Impact Driver
18V Cordless Impact Driver 180 N·m
Features
Standard Equipments : Hook, Hand strap, Phillips bit
Available options
Technical specifications
| Capacity Machine screw | M4 - M8 |
|---|---|
| Capacity Standard bolt | M5 - M16 |
| Capacity High strength bolt | M5 - M14 |
| Capacity : Steel | 22 mm |
| Capacity : Wood | 24 mm |
| Driving shank (Hex) | 6.35 mm |
| Max fastening torque | 180 N·m |
| Max fastening torque | Hard / Med. / Soft : 170 / 50 / 20 N·m |
| No Load Speed | Max / Hard / Med. / Soft : 0 - 3,600 / 0 - 3,200 / 0 - 2,100 / 0 - 1,100 minˉ¹ |
| Dimensions (L x W x H) | 111 x 81 x 234 mm |
| Net weight | 1.5 kg |
The protrusions on the LED sections on both sides have been eliminated, improving the screwdriving performance in tight corners or confined spaces.
• The LED emits light in a ring shape from the tip of the hammer case, significantly reducing the shadow of the bit.
• The brightness (3 stages) can be changed by pressing and holding the mode switch button.
The switch panel has been moved to the rear side of the battery, allowing the user to check and change the mode during operation.
The center of gravity has been moved closer to the center line of the grip, by locating the battery 12mm backward compared with the current model, reducing the strain on the wrist during operation.
• To turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again.
• The light turns off automatically one hour after turned on.
• In the light mode, the brightness (3 stages) can be switched by briefly pressing the mode switch button.
The total length has been reduced by 3mm by revising the structure of the mechanical part.
• Reduced resistance allows for easier bit installation
• Designed to hold the bit more securely