๐ A robotic mower designed to mow the lawn and recharge automatically to achieve a high operation rate of 3,500m² due to fast charging ๐ The main features and benefits are: • Specifying work area with wires • Random running • Maintenance software-supported ๐ Max work area: 3,500 m² • Maximum work area greater than competing models has been achieved by shortening charging time ๐ Washable with water • The top cover can be removed to wash the entire machine • Reduces the burden of off-season maintenance ๐ Determining the cutting height • If the lawn is high, user can let the mower automatically mow the lawn down to a desired height gradually in stages over several days by setting the starting height and desired height in the mower • Setting range of cutting height is 20 - 60mm, 5 mm increments (9 stages) ๐ Automatic mowing and automatic charging • Automatic mowing and charging reduces the labor required for lawn maintenance • A boundary wire and up to two guide wires control traveling of the robotic mower ๐ Max climbing angle 26° • Mows even on undulating lawn due to the high traveling performance on slopes ๐ High maintainability • The operation of multiple motors, sensors, lights, etc. can be examined individually by connecting the mower to PC with a cable and using the dedicated maintenance software • Easy to identify defective parts and check the operation after repairs ๐ Mowing start position setting • Up to 5 start positions for mowing can be set • If the setting position is not at the station, the robotic mower travels along wires and starts mowing in a random mode • It is possible to control mowing frequency variation in areas where mowing is less frequent, such as at the end of narrow aisles ๐ Schedule Setting • Mowing can be scheduled at the user's convenience by setting the days of the week and time to mow the lawn Spiral cut • Detects an area where the lawn cannot be mowed smoothly due to long or dense lawns (high load on machine), and gradually mows the area in a spiral shape for minimum uncut area ๐ Cutting width 240mm ๐ Three swing back blades • Eliminate impacts when hit by stones, etc • The blades can be replaced with a single screw per blade ๐ Theft-deterrent • Setting a PIN code and the alarm function deter theft of the machine • Turning on/off the alarm function when the machine is stopped and the necessity of the PIN code input when resuming operation can be set as follows: - When the machine is stopped: PIN or PIN & Alarm - When it is detected that the machine has been lifted: PIN & Alarm - When it is detected that the machine has been tilted: PIN & Alarm